高功率值小功率经过多次实验发现报告仪（耐弧光经过多次实验发现报告仪）-（求算机控制）

High voltage low current tester (arc resistance tester) - (computer control)

车辆名号：耐电弧试验机

Product name: electric arc resistance tester

厂品规格型号：NDH-A

Product model: NDH - A

充分满足标准的：GB/T 1411-2002《固态物电绝缘的原材料耐高低平电压电流电弧释放释放的实验室检测》（等一起IEC  61621-1997）及ASTM D495等原则的标准要求制作创造的，并按照IEC 149、UL 746A等校正方法步骤

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

一般用于规模及用途：

本实验设计机是可以依照采应用在调速电机、物品和家庭装物品等业内的电工维修用PVC、硅橡胶胶和隔绝漆等隔绝装修食材的耐脉冲能力指标考评，主应用在固态物体隔绝装修食材如：PVC、塑料薄膜、硅橡胶、矿石、卫浴陶瓷、安全玻璃、隔绝油、隔绝漆、厚纸板等导电介质的耐脉冲能力指标测式；

本现场研究机由核算机把握行驶，能够提示现在研究的状态及研究时长，研究结束后后并保留现在研究统计资料，并可直接打印.规范实践上报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为上下两边三合一设计，中下部为使用设备，顶部为耐压恒温恒湿试验箱。

2 本厂品用于*新自动化控住技术设备，进行首选程序流程（IEC或ASTM）可电脑自动实施测试，并在PC苹果电脑表示耐压试验时候和数据。

3 **耐热性稳定，抗串扰专业能力强，各种测试精度等级高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断时刻数据误差：乘以 ±10ms

2 调压器容积：2kVA

3 额定容量疲劳试验电流值：12.5kV

4 经过多次实验发现额定电压gps精度：±3%

5 直流电有效控制计算精度：±10%  电压测量方法可靠性强，精密度：1.5%

6 探针对试件经济压力：（0.5±0.05）N

7 电级资料：钨棒

8 参比电极距离感：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 选择坏境温差：（23±2）℃

10 施用环保对环境温度的：（50±5）%

11 主机电源：220V±5%  50Hz  10A

12 疲劳试验    策略：   标准/美标/10 mA 连续性/20 mA 间断/30 mA间断性/40 mA连着

13 应力测试软件以下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 食品形号：

NDH-A    耐电弧焊接试验报告仪-微机控住

NDH-B    耐电孤试验台仪-接触屏操纵

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！